• Pollutants can be treated using diverse absorption liquid depending on their characteristics.
• The pressure loss is small as it does not use filter treatment method.
• Diverse pollutants such as high concentration gas, dust and mist can be removed at the same time.
• The facility can maintain constant removal efficiency even though there is a change in the gas flow.

• Issue of freezing prevention
• White smoke problem
• Second pollution problem (generation of wastewater)
• Plugging problem of the bed and plate
• It has a high pressure loss, requires high power, and may be corroded or eroded. (The degree of corrosion or erosion depends on the material quality.)

• Chemical plant, textile factory
• Plating plant
• Wastewater treatment plant
• Excreta treatment plant
• Offensive odor generating business place
• Fine particulate matter, harmful gas, VOC, and fume generating business place

In a Vortex Mix Scrubber, vortexes are formed using an infringement plate and directly contact dust and pollutants to absorb and remove them.

• It is easy to maintain and repair the equipment as the composition of the equipment is simple.
• It has little risk of being clogged with dust as there is no cleaning liquid injection nozzle or a packed bed.
• The maintenance cost can be minimized as there is no pump for cleaning or a material to be filled.
• It is easy to adjust the water level of the equipment depending on the type of flowing-in dust.
• In addition to the above features, it can treat pollutants at high efficiency.
• It is an environment prevention facility which can substitute the existing packed tower.

• Water soluble harmful gas
• Chemical process that discharges resin
• Coal transferring process in a thermal power plant
• Viscous dust discharging process
• Plating, textile, paint, semiconductor processes
• Various VOCs generating process
• Offensive odor generating process
• Petrochemical process

A Rotating Disk Scrubber is a device produced by combining a Cyclone and a Wet Scrubber, in which the gas flow containing dust forms a cyclone and enters into the Wet Scrubber to remove granular pollutants including gas after passing through the rotating layer.

• Plating process
• Metal dissolution gas process
• Facilities posterior to an incinerator
• Various other harmful gas processes